Leak detection finds the exact source of a hidden water leak without tearing out walls or floors unnecessarily. Plumbers combine meter testing, pressure testing, acoustic listening, thermal imaging and camera inspection to locate the leak, so the repair is targeted. Unexplained high water bills and the sound of running water are the usual first signs.
The U.S. Environmental Protection Agency’s WaterSense program estimates that the average household loses nearly 10,000 gallons of water a year to leaks, and that about 10 percent of homes have leaks wasting 90 gallons or more per day. Most of that is invisible. Water seeps under slabs, inside walls and through underground service lines long before a stain appears.
The cost of a hidden leak is not only the water bill. Constant moisture feeds mold, rots framing and subfloors, loosens flooring, damages foundations over time and can invite pests. Catching a leak early keeps repairs small.
Any one of these is a reason to investigate. Several together are a strong reason to call.
Two quick checks can tell you whether a leak probably exists. They do not replace a professional diagnosis, but they help you describe the problem.
If the meter keeps running with every fixture checked and off, the leak may be in a buried line or inside a wall. That is a leak detection call.
A good leak detection visit starts with questions and testing, not hammers. Plumbers use a combination of methods, because no single technique works in every situation.
| Method | How it helps |
|---|---|
| Meter and pressure testing | Confirms a leak exists and whether it is on the supply or drain side |
| Acoustic listening | Detects the sound of escaping water in pipes, walls and under slabs |
| Thermal imaging | Shows temperature differences that can reveal moisture or hot-water leaks |
| Moisture meters | Measure dampness in drywall, wood and flooring to trace a leak's path |
| Camera inspection | Looks inside drain lines for cracks, offsets and root intrusion |
| Zone isolation | Shuts off sections of the plumbing to narrow down the leaking branch |
Once the leak is pinpointed, repair options can be explained with an opening that is as small as possible. Whether the repair is a section of pipe, a fitting or a reroute depends on the material, the location and the age of the system.
Where the leak sits changes the repair. A slab leak occurs in a pipe under the concrete foundation, often copper or older materials, and may show up as warm floor spots, a sudden pressure drop or a high bill. A leaking supply line between the meter and the house can saturate soil and affect your yard or driveway. A drain or sewer line leak is less obvious, because it leaks wastewater rather than pressurized water, and may cause odors, soggy ground or recurring backups.
If a drain or sewer problem is suspected, a camera inspection is the right next step. Read our drain cleaning and sewer line repair pages for more.
If water is actively escaping, shut off the main valve, turn off the water heater if it is involved, and move belongings away from the wet area. Photograph the damage for your insurance claim. Our emergency plumber page walks through the safe order of steps. If the leak is at the water heater, see water heater repair.
We locate leaks in homes across Augusta, Martinez, Evans, Grovetown and Hephzibah. Older homes, homes on slabs and properties with long service lines each have different risks, and we explain which apply to yours. Verify any plumber through the Georgia Secretary of State’s licensing lookup at sos.ga.gov and ask for a written description of the leak’s location and the repair.
Signs include an unexplained rise in your water bill, the sound of running water when everything is off, a moving water meter with all fixtures off, damp spots or mold, and sudden low pressure.
Turn off all water use, then watch the meter for about fifteen minutes. If the leak indicator turns or the dial moves, water is escaping somewhere after the meter.
The EPA’s WaterSense program estimates the average home loses nearly 10,000 gallons a year to leaks, and about 10 percent of homes lose 90 gallons or more per day.
Often yes. Acoustic listening, thermal imaging, moisture meters, pressure testing and camera inspection can usually narrow a leak to a small area before any opening is made.
A leak in a pipe running under or within the concrete slab foundation. Warm floor spots, a sudden drop in pressure, or a high bill can all be signs.
It can be. A worn flapper can waste a lot of water without making noise. A dye test in the tank is a quick way to check.
Coverage depends on the policy and on whether the damage was sudden or gradual. Document everything and ask your insurer what they require.
Shut off the main valve, turn off the water heater if involved, protect belongings and call a plumber. Photograph the damage before cleanup.
Tell us what you are seeing on your bill or in your home. We will find the source and explain the repair before any walls are opened.